Don't be too tight between the chain and the guide plate. When the electric chain saw is working, smooth oil can not only protect the guide plate, but also protect the chain. At the same time, the variable box of the electric chain saw needs to be replaced a year ago, and the carbon brush of the motor needs to be changed frequently, about half a year. Precautions before operation:

1. Wear shoes at work.

2. At work, wear fat, open clothes and shorts, and wear decorations, such as neckties, bracelets, anklets, etc.

3. Carefully check the wear degree of saw chain, guide plate, sprocket and other components and the tension of saw chain, and adjust and replace them.

4. Check the electric chain saw switch, whether the power connector is firmly connected, and whether the cable layer is worn.

5. Check the workplace to reduce stones, metal objects, branches and other discards.

6. The evacuation channel should be selected before work.

operation

1. When the original strip to be processed is less than 1.5m from the conveyor, it will not work.

2. Before the power is turned on, it is suggested that the electric chain saw switch be closed.

3. It is recommended that the electric chain saw idle for 1 min before making wood to check whether it works normally.

4. When suggesting or operating, hands and feet should not be close to the rotating parts, especially the upper and lower parts of the chain

5. Check when the fuse is blown or the relay trips.

6. Connect high capacity fuse.

7. Use both hands to operate the electric chain saw.

8. When working, stand firmly and operate under the original strip or log or on the rolling strip or log.

9. When cleaning the defects of the clip saw, special assistant personnel shall be assigned.

10. During working, sawn wood should be smooth and cool arranged.

11. When the original strip is about to be sawed, the intention of the wood is to lift the electric chain saw after sawing.